XTD Type Cyclone Ceramic Multi Tube Dust Remover Corrosion Resistance

XTD type cyclone ceramic multi-tube dust remover is the company's research and development of a new generation of low-impedance dust removal equipment, with corrosion resistance, wear resistance, high temperature resistance, non-clogging, long service life, simple operation and management, no cost, no secondary pollution and other advantages. The flue gas outlet can be located on 1st party according to the user's requirements.

The dust remover is divided into the upper and lower two pieces (part), the upper part is the dust removal device, the lower part is the ash bucket, the flue gas import and export flang in the upper part, the high french for the export, the frankincly connected fan, the lower is the imported flang, the boiler flue.

Principle: The dust remover is a cyclone-type dust remover, when the dust gas enters the dust collector, through the ceramic guide tube, in the cyclone internal high-speed rotation, under the role of centrifugal force, dust and gas separation, dust landed in the dust collection box, discharged by the ash valve, purified gas to form a rising cyclone, through the exhaust pipe gathered in the assembly chamber, through the exit by the chimney discharge, to achieve the dust removal effect.

Dust removal efficiency: 65%-80%

Resistance: 700pa

How to do a FAQ

1, in the installation, the frankin and the french connection in the middle of the asbestos rope, and bolted tightly, to prevent leakage, affecting dust removal efficiency.

2, put into use, need to be out of ash on time, generally not more than 4 hours once, to prevent excessive dust collection in the dust collection box.

3, due to the design and use of units should be based on the boiler exhaust volume, flue gas flow, supporting the use of dust removers, and provide the use of units of boiler dust remover surrounding space.

4, when releasing ash must first close the fan, the ash mouth is strictly prohibited to hit with a hammer, often check whether the gray mouth is sealed and blocked. Mechanical ash does not need to turn off the fan, can be continuous ash.