Main Market
North America
South America
Western Europe
Eastern Europe
Eastern Asia
Southeast Asia
Middle East
Africa
Oceania
Worldwide
Wuxi Cangier Technology Development Co., Ltd. was established in 2007, with a registered capital of 58 million yuan, more than 140 employees, fixed assets of 80 million yuan, covering an area of 33,000 square meters.
The company is a high-tech enterprise recognized by the state, with the third-level qualification of professional contracting of environmental protection engineering, and has passed the ISO9001:2015 international quality management system certification.
The company specializes in the production of liquid, gas, solid and other kinds of waste incinerator, industrial waste water treatment equipment, such as: industrial hazardous waste incinerator, chemical, pharmaceutical industry incinerator.
The main types of furnaces are: rotary kiln, solid incinerator, liquid incinerator, exhaust gas direct combustion furnace, RTO regenerative incinerator, comprehensive incinerator, medical waste incinerator, etc.
waste liquid incinerator
scope of application:
High concentration of organic wastewater.
Product characteristics:
1. Good atomization effect: using Japanese atomization technology, with small atomized particle size and sufficient combustion.
2. No secondary pollution: low nitrogen combustion technology, smoke-free, no odor, no harmful gas.
3. High safety: flame monitoring system, complete alarm system, and no explosion consideration.
4. Low fault rate: imported parts, double-circuit system, good quality and long life.
5. Waste oil, waste liquid, waste solvent and organic waste gas can be treated well at the same time to reduce the operating cost.
organic waste gas incinerator
scope of application:
Industrial mixed exhaust gas; combustible exhaust gas, color paint paint exhaust gas; non-combustible exhaust gas that can be cracked at high temperature; toxic gas,
Dangerous and explosive gases, etc.
Product characteristics:
1. Multi-stage resistance tempering device.
2. Exsive control device.
3. Emergency discharge device.
4. The vortex street flow device is controlled by PLC.
5. Thermal energy recovery, and to reduce operating costs.
Heat-storage waste gas incinerator (RTO)
scope of application:
Painting, textile, pharmaceutical, chemical medium and low concentration, strong wind amount of organic waste gas;
The waste gas composition is complex, low calorific value, toxic and odor of harmful waste gas;
Due to different production lines on the same production line, the exhaust gas composition often changes;
The waste gas contains the components of the catalyst poisoning or activity decline (for example, mercury, lead, tin, zinc, arsenic, phosphorus, etc.).
Product characteristics:
1. Significant energy-saving effect, while reducing the number of greenhouse gas emissions.
2. Better heat exchange effect.3. Low combustion noise.
4. Improve the purification efficiency, and also prolong the furnace life.
5. Adopt graded combustion technology with good heating effect.Good environmental protection effect.
6. Complete organic oxide decomposition.
7. Adopt PLC automatic combustion control, with high degree of automation, stable operation, and high safety and reliability.
8. The heat energy recovery device can be reasonably set up according to the waste gas situation, and connect the heat conductive oil furnace or waste heat boiler in the high temperature combustion chamber. The low temperature flue gas is used to heat the waste gas and make full use of the waste heat.
solid waste incinerator
scope of application:
Industrial Waste (Polymer Waste) Plastic PE, PU, EVA, Rubber (Tire), Paulone, Porter, Bottle, Fiber, Foam, Cotton, cloth, resin, acrylic, Leather, Cattle Pander, Integrated Plate,
Electric wood powder, urea powder, vegetable melon cloth, audio tape, coating, polymerization
Things, etc.General garbage: cardboard, paper scraps, wood debris, leaves; screened community household garbage; hotel garbage; office garbage, etc.
Product characteristics:
1. Low investment and convenient operation.
2. Disassemble the secondary combustion with high heat, so ensure the complete combustion.
3. The inclined structure can prevent the reverse fire and release it easily.
4. Exquisite design, so the small space can also be installed.
5. Negative pressure design and operation safety.
6. Waste heat can be recovered for hot water or heating.
Heat control gas furnace
scope of application:
Medical waste, industrial hazardous waste.
Product characteristics:
1. Wide adaptability, and more prominent potential for large waste.Static pyrolysis, gasification and incineration of waste, small dust production greatly reduces the load of the subsequent exhaust gas purification section, and the discharge gas is colorless, tasteless and without black smoke.
2. After incineration, the waste volume will be reduced by more than 95, the ash treatment cost is low, and the ash discharge is non-toxic and harmless.
3. Incinate one loading, continuous incineration, reduce the operation labor intensity, and avoid the contact between operators and hazardous waste to ensure the operation safety.
4. The operation cost is low, and make full use of the heat generated by waste pyrolysis incineration to reach the design temperature.
5. High degree of automation, automatically adjust the air volume, and automatically adjust the combustion state of the burner according to the outlet flue gas temperature.
Rotary incineration furnace
scope of application:
1. Sludge type and paste waste treatment.
2. Centralized treatment of industrial waste.
Main Market
North America
South America
Western Europe
Eastern Europe
Eastern Asia
Southeast Asia
Middle East
Africa
Oceania
Worldwide
Business Type
Manufacturer
Trading Company
Brands : CHANGIER
No. of Employees : >100
Annual Sales : 1000000-20000000
Year Established : 2010
Export p.c : 40% - 50%
Company History
With 10 year's experience on water treatment field.Our company has cooperated with Nanjing University, Southeast University, Nankai University, Nanjing University of Science and Technology, Jiangnan University, Changzhou University, Northwest municipal engineering design and research institute, etc. Through the way of introducing after cooperating, this company has attracted many top talents and organized into an innovation team. Based on the doctor team, the researchers team up to carry out the research and development of the projects and problems with a real relationship to itself.
Company Service
Company Team
Research and development technical team;Marketing and service team;Engineering design and application team;Manufacturing technical team;Project installation team;Engineering after-sales service team;Administration and finance management team.