Industrial Centrifuge Price Olive Oil 3 Phase Decanter Centrifuge Food

Double-motor horizontal spiral discharge sedimentation centrifuge
Horizontal spiral discharge sedimentation centrifuge (referred to as horizontal screw centrifuge) is a device that uses centrifugal sedimentation principle to separate suspension. For solid particles equivalent diameter = 3um, weight concentration ratio: 10% or volume concentration ratio = 70%, liquid-solid specific gravity difference: 0.05g/cm3. all kinds of suspensions are suitable for liquid-solid separation or particle classification using this kind of centrifuge.
The horizontal screw centrifuge produced by our company has six series and eleven specifications, including LW-250, LW-350, LW-430, LW-450, LW-500, and LW-550. The rotor structure is divided into parallel flow, countercurrent, composite spiral, two-way extrusion and other forms have concentrated, dehydrated, graded, concentrated and dehydrated integrated models in use, so it can be widely applied to chemical industry, light industry, pharmacy, food, environmental protection and other industries.
The company can also undertake equipment selection and design and manufacture according to the special needs of users. Users are welcome to bring materials to our company for small samples and pilot tests.

According to the specific use background and requirements, our company has developed a variety of combination modes of centrifuge drum and spiral propeller:
1. Two AC variable frequency motors and two frequency converters are adopted to drive the drum and spiral respectively, and the differential rotation speed is adjusted by adjusting the rotation speed of the auxiliary motor. In addition, the automatic control function of differential speed is added;
2. Use an AC variable frequency motor frequency converter to drive the drum, and a hydraulic motor (variable frequency) with independent hydraulic pump to drive the spiral, and adjust the differential rotation speed by adjusting the flow rate of the hydraulic pump. The differential speed can be automatically fed back and adjusted according to the pushing load.
Horizontal screw centrifuge is a device that uses centrifugal sedimentation principle to separate suspension. The liquid phase with large specific gravity is in the outer ring, and the liquid phase with small specific gravity is in the inner ring, which flows out at the respective discharge ports, and the solid phase is continuously discharged through the spiral push device. Horizontal screw centrifuge is a device that uses centrifugal sedimentation principle to separate suspension. For solid particles equivalent diameter ≥ 3 μm, weight concentration ratio ≤ 10% or volume concentration ratio ≤ 70%, all kinds of suspensions with liquid-solid density difference ≥0.05g/cm3 are suitable for liquid-solid separation by this kind of centrifuge.

In terms of application, it has the functions of concentration, dehydration, grading, concentration and dehydration, so it can be widely applied to chemical industry, light industry, pharmacy, food, environmental protection and other industries.

Structural features:
1. Drum and other main parts are made of corrosion-resistant stainless steel;
2. The feeding spiral adopts special anti-wear measures, which can spray weld hard alloy protective layer or insert hard alloy wear plate;
3. Large LD ratio design can increase the settlement area of materials, prolong the settlement time of materials in the drum, and lower the moisture content of filter cake.
4. The drum conic section structure with large cone angle is adopted to enhance the extrusion force of the spiral to filter cake and increase the solid content by filter cake. Under the same separation factor, the filter cake is drier and the liquid is clearer, the operation is more economical.
5. Select cycloidal pinwheel, planetary gear or hydraulic differential with heavy load and large transmission ratio; Its slag conveying torque can reach 3600 N. m, greatly improve its slag removal capacity.
6. The drive system is designed for double motors and double frequency conversion, with adjustable differential rotation.

Technical Parameters:

Application Scope:
The decanter centrifuge is suitable for solid-phase dewatering, liquid-phase clarification and separation, liquid-liquid-solid three phase separation and size-grading of various suspensions with solid-phase particle sizes of 0.005-15mm, consistency of 1-40% and temperature of ≤ 100°C, esp. for separating the suspensions whose consistency and particle size vary greatly and for which recovery of filter cloth is difficult, such as treatment of PVC resins, ammonium sulfite, barrium carbonate, strontium sulphate, lithopone,starch, diatomite, plaster, bauxite, soybean protein, peanut protein, fruit juice, drinks, vegetable oil, citric acid, powder of blood, powder of titanium white, kaolin clay and drilling mud, etc., and dewatering of washed coal and fine coal, purification of waste oil, treatment of grain stillage liquid waste and municipal sewage and mineral classification. Besides, it is suitable for waste water treatment of electric power plant sludge, printing and dyeing sludge, paper manufacture sludge.

Solid-liquid separation	Sludge dewatering	Grain size segregation	Liquid phase clarification
Polyvinyl chloride resin	Power plant sludge	Titanium dioxide	Soybean protein
Ammonium sulfite	Printing and Dyeing sludge	Kaolin	Peanut protein
Barium carbonate.	Papermaking sludge	Starch	Juice
Strontium carbonate	Natural gas desulfurization sludge	Drilling mud paddle	Beverage
Xinde pink	Calcium carbide sludge	Pulverized coal flotation	Vegetable oil
Barium sulfate	Fiberboard sludge	Crystal stone flotation	Citric acid
Calcium sulfate	Drilling mud paddle	Diatomaceous earth	Waste oil purification
Starch	Chlorine two mud	Gypsum	Washing water purification
Sprinkling waste liquid	Car sludge	Bauxite	Orange juice
PTA	Activated sludge	China clay	Chlorine two mud
Blood Powder	Gypsum paddle	Ore	Alum sludge

Sludge separator is a device that uses centrifugal sedimentation principle to separate oil from oil field. The sludge in crude oil can be separated, and the equivalent diameter of solid particles = 3um, weight concentration ratio: 10% or volume concentration ratio = 70%, liquid-solid specific gravity difference: 0.05g/cm3. all kinds of suspensions are suitable for liquid-solid separation or particle classification using this kind of centrifuge. Due to the high water content of raw coal tar produced by gas, during the continuous distillation of coal tar, water will increase the system pressure and destroy the normal process operation system, in severe cases, it will cause pipeline and equipment rupture and lead to fire accidents. At the same time, corrosive substances brought with moisture will also corrode equipment and pipelines. It has certain influence on the sale and distillation of coal tar, so it is necessary to adopt effective dehydration equipment. Super three-phase centrifuge is a fully enclosed and fully automatic processing equipment. After the original coal tar enters the centrifuge through tar pump, it will automatically dehydrate, automatically remove slag, and automatically produce oil, which will be discharged from their respective outlets respectively. Ammonia water can enter the circulating ammonia tank through the pipeline and be reused; Tar is input into the tar storage tank through the pipeline, and tar residue is transported to the designated accumulation yard by conveyor belt or transported outside the loading vehicle. This equipment has high production efficiency, low labor intensity and clean working environment. Compared with other dehydration equipment, it is an ideal coal tar dehydration and slag removal equipment.