Industrial Water Treatment Chemicals Ammonia Nitrogen Removal Degradation

【product description】

Ammonia nitrogen remover is a product processed by special technology for the characteristics of large discharge of industrial ammonia nitrogen wastewater, complex composition and strong toxicity.

The ammonia nitrogen removal agent developed and produced by our company has the characteristics of completing the reaction in 6-10 minutes, and the removal rate of ammonia nitrogen is more than 96%. It can help reduce COD and also has a certain removal effect on pigments and heavy metals.

The basic principle of the medicament is to generate nitrogen (N2) through the reaction between the high molecular inorganic compound of the framework structure and the ammonia nitrogen in the wastewater, so as to achieve the purpose of removing the ammonia nitrogen in the wastewater. In application, the product can degrade the concentration of ammonia nitrogen in wastewater to a large extent, and at the same time make use of its characteristics to make the organic pollutants in the wastewater inorganic, effectively reducing the content of organic pollutants.

【Product advantages】

◆The product has a fast reaction speed in application, and the removal rate of ammonia nitrogen is over 96%;

◆Using its strong oxidizing characteristics during the reaction process, the COD concentration in wastewater can be degraded to a large extent;

◆Waste water does not need to be precipitated during the treatment of the product, and the reaction can be directly added to the end of the system after dilution;

◆The product application process is simple, and the agent can be directly put into the original wastewater treatment device, and the operation is convenient.


【Instructions】

When in use, this product can be directly added or added to the dissolving tank first to prepare a solution with a concentration of 10-20%, and then added to the reaction tank through a pump;

The concentration of ammonia nitrogen is required to be below 500mg/L, and the powder of the medicine (or the aqueous solution) must be added and fully stirred;

The optimal pH value of sewage is between 7-12. For example, acidic wastewater should be adjusted in pH value;

The dosing point is generally the last step. After fully stirring for 5-10 minutes, use aeration to blow off for 10 minutes;

The specific dosage should be based on the actual experimental data;

Generally, bubbles are generated when the medicine is added, and there is no sediment, except for individual water quality.

【Experimental data】

The following table compares the effects of different dosages on ammonia nitrogen treatment:

【Application field】

It is suitable for wastewater with excessive ammonia nitrogen in various industries, mainly used in the following aspects:

Circuit board wastewater treatment of excessive ammonia nitrogen

Treatment of Electroplating Wastewater with Excessive Ammonia Nitrogen

Treatment of Excessive Ammonia Nitrogen in Textile Wastewater

Excessive treatment of slaughter wastewater

Treatment of excessive ammonia nitrogen in papermaking wastewater

Treatment of excessive ammonia nitrogen in aquaculture wastewater

Treatment of excessive ammonia nitrogen in printing and dyeing wastewater

Treatment of excessive ammonia nitrogen in electrical and electronic wastewater

Treatment of excessive ammonia nitrogen in domestic wastewater

Treatment of excessive ammonia nitrogen in metal processing wastewater



【Packing, Storage and Transportation】

Packing: white woven bag lined with polyethylene plastic bag 25KG/bag;

Storage and transportation: The product should be stored in a cool, dry and well-ventilated warehouse, moisture-proof, waterproof, water-proof, fireproof, isolated from fire and heat sources. It is forbidden to mix with flammable, explosive, spontaneous and self-explosive substances. Do not mix with oxidants. Reducing agent is easy to be mixed and stored by chlorinated and oxidized substances.