|Place of Origin:||Jiangsu,China|
|Minimum Order Quantity:||Negotiable|
|Packaging Details:||According to the customer demand and suitable for long distance transportation.|
|Delivery Time:||30 days after deposit arrives|
|Supply Ability:||100 Piece/Pieces per Month|
|Deal With:||Waste Liquid||Heat Recovery:||Steam|
|Name:||Waste Liquid Incinerator||Warranty:||12months|
|After-sales Service Provided:||Video Technical Support, Online Support||Processing Method:||Low Temperature Pyrolysis, High Temperature Oxidation|
|Scope Of Application:||Chemical Waste Liquid, Non-combustible High-concentration Waste Water||Application:||Chemical Industry, Pharmaceutical|
incineration of biomedical waste,
hospital waste incinerator,
Waste liquid incinerator
This unit is a special incinerator for liquid state treatment. It can fully decompose organic matter and harmful compounds containing chlorine, benzene and phenol in waste liquid by high temperature pyrolysis at 850-1100 ℃, which is especially suitable for high concentration organic waste liquid.
The waste liquid incinerator incineration system can be used to treat various waste liquids, wastewater and waste solvents within 1000 kg. The incineration system of the furnace body includes: + GL heat exchanger + + + spray scrubber connected to the flue exhaust fan + + + ignition combustion chimney compressed air atomization system + system + supplement + oxygen air system instrument control system A complete incineration process; the entire system runs in the design of automatic pressure control. The exhaust fan speed profile negative pressure sensor PID, the system pressure within the normal working range (-30-50pa), the exhaust fan failure interlock protection; the combustion system can use diesel, natural gas or waste liquid as auxiliary fuel. High temperature resistant corundum castable in high temperature incineration areas. This material has good thermal stability, strong corrosion resistance, small changes, and long service life. The long-term use temperature is 1600 degrees C and the high temperature of high temperature wear-resistant castables is 1300 degrees. Used in flue gas areas.
The main treatment methods of domestic waste include incineration, composting, mechanical treatment and landfill. A variety of metabolites and moisture will be produced in the process of garbage stacking, transfer, extrusion, transportation, landfill or incineration, which forms a highly complex high concentration organic wastewater landfill leachate. After the untreated landfill leachate flows through the surface or seeps into the groundwater, it will destroy the ecological balance of the surrounding soil, Soil or water pollution will cause serious secondary pollution to the environment.
The landfill leachate contains ammonia nitrogen and various dissolved cations, heavy metals, phenols, soluble fatty acids and other organic pollutants. It has the characteristics of complex water quality, large changes in water quality and water quantity, high concentration of organic matter (BOD5 and COD), high content of ammonia nitrogen, and high metal content. Therefore, the following conditions should be met in the selection of landfill leachate treatment process:
1. To meet the characteristics of large change of water quantity, sufficient allowance should be reserved in the process design of waste liquid incinerator;
2. The ability of resisting water quality impact load is strong, and the water quality of leachate fluctuates greatly. Therefore, it is required that the treatment process of waste liquid incinerator should have strong anti shock load capacity;
3. With high COD and BOD removal capacity, the COD concentration of landfill leachate varies widely, up to 80000mg / L or even higher. Therefore, the treatment process needs to have high removal capacity of organic pollutants;
4. With high ammonia nitrogen treatment capacity, the ammonia nitrogen concentration of leachate generally ranges from hundreds to thousands of mg / L, which is generally considered to be about 1500-3000mg / L. But it can also be as high as 4000 mg / L. High ammonia nitrogen removal rate is required for the treatment process;
5. Reduce the secondary pollution of waste liquid incinerator as much as possible.
The company specializes in the design, manufacture, sales, and engineering installation of environmental pollution prevention equipment such as rotary kiln incinerators, waste liquid incinerators, and waste gas incinerators, and chemical hazardous waste incineration equipment. The company is an environmental protection enterprise integrating R&D, design, production, installation and commissioning, and service.
The company has passed the iso9001:2015 international quality management system certification, has modern production workshops and office buildings, large production complete sets of equipment, and has strong technical force and production capacity from product design, manufacturing, quality inspection and performance testing. In addition to the normal production, technology, quality, safety and other management departments, in order to promote the continuous innovation of core technology and products, and further enhance the core competitiveness, the company has set up a technology development center, which cooperates with a number of universities and colleges to carry out new product development, technical research and other work, and build a complete R & D system. With advanced scientific management, modern detection means, reasonable sales price, high quality products, and excellent after-sales service, the company has won extensive appreciation and trust from users. It is sold well in the whole country, Southeast Asia, Africa, South America and other countries and regions, ranking in the forefront of the local industry and enjoying a high reputation.
Q: What’s the advantage compared to other suppliers?
A: Competitive price with high quality of product and superior service. We have professional sales team, production team and researching team.
Q:How is our customer service?
A: All our sales representatives can speak fluent English. They will answer all of your questions within 12 hours.
Q:What others can we offer?
A: Based on the wide product range, we offer the best One-Stop sourcing service. We will definitely save you a lot of time and money, and based on our huge quantity of shipment,we can get the best shipping service from the best forwarders. This will also help you to save a lot on the shipment.
Q:What is the MOQ of our products?
A:The MOQ is 1 set.
Q:What is the payment of our company?
A. T/T ,L/C are all acceptable for us.
Contact Person: XUE JIANG(Hellen)